english prs63_e.htm; updated: 18 MAY 2011; 19% MwSt deutsch
schulze elektronik gmbh

General view TopFuel batteries

The Original TopFuel batteries differ from the
Schulze TopFuel batteries only in the balancing socket.
It is no special Schulze selection and therefore good value.

All Schulze TopFuel battery packs are retrofitted from us with the usual
Schulze balancing cable socket which is directly mounted on the surface of the pack.
1s to 4s packs are equipped with the 10-pin socket. the
5s to 12s packs are supplied with 20-pin sockets.
The battery type and the battery capacity are completely coded by a bridge and a resistor to the Schulze configuration directive.

The balancing socket has a height of 11 mm - in all lists below shown as (+11) - and is glued either on the narrow side of the pack or on the broad side of it when e.g. the narrow side is not wide enough for the 20-pin connectors.
FlightPower FlightPower
A short "extension cord" (BalCabxx-Verl - see accessories)
between the Schulze battery and
your Schulze LiPoCard(2 or 3).
the Schulze LiPo(Profi)Balancer or
the Schulze nextGeneration charger
ensures instantly and without any solder works for the right connection and
the fully automatic configuration of the connected battery pack.

T h e "plug & play" - solution for you!

If you prefere the Original TopFuel batteries.
then you can connect them via our balancing adapters
BalAd-TP4
and/or BalAd-TP14 to
the Schulze LiPoCard(II).
the Schulze LiPo(Profi)Balancer or
the Schulze nextGeneration.

In this case you have to select the battery type and the charge current for your battery manually at the device.

Hint:
We are using battery packs which are delivered by Hacker Motors
Picture
Order-
Information
with Original
TopFuel / FlightPower
Balancing
Connectors

Type
Voltage
Capacity
Size
Weight

Price
 
Order-
Information
with Schulze
Balancing
Connector

Price
TF-Akku
Original Hacker Order Information
See Hacker Website
See Hacker Website

Shipping Costs
 
Original Hacker Order Information
and the additional hint:
"With Schulze BalCab Connector"
Hacker-Price
plus
3% extra charge!

e.a.
Calculation rule: Hacker Price multiplied by 1.03 = Schulze Price

Shipping Costs


Copyright © 1996-2011 Schulze Elektronik GmbH.
All trademarks shown are trademarks of their respective owners.
All rights reserved.
http://www.schulze-elektronik-gmbh.de
Designed by matthias schulze